Project Description
These cable terminations are suitable to be installed on single-stranded cables and are used in outdoor spaces where they have direct contact with wind, rain or snow and there is heavy pollution in the environment.
- Room temperature ranging from -40 to +105 °C
- Cross-linked insulation
- Flame retardant
- Easy installation
- In accordance with CENELEC HD 629.1S1, DIN VDE 0278, IEC60502-4 Standard
- With UV protection layer
- With unlimited lifetime / energized as soon as it is installed on the cable
- Suitable for very polluted environments
To order a cable with specific cross section and conductor type, you can act as follows at the time selecting the code.
For instance:
Outdoor single core cable termination for a voltage of 24kv with 185 mm2 cross section and PHHK – 1E24 – 185AI aluminum cable lug
- Insulating tubing
- Stress control tubing (shrinkable or push-on)
- Yellow tape
- Red tape
- Medium voltage cable lug
- Installation manual
- Earth cable lug
- Rain shed
- Armor kit (if the cable is armored)
- Earth kit (if the earth is tape shield)
PHHK – 1E cable terminations have all the properties of PHSK – 1E cable terminations. The difference is that they are designed and manufactured for installation in higher altitudes with severe raining and snowing or in heavily polluted environments.
X = cable cross-section (mm2) Y= (A1/Cu/BI) Type of cable lug |
Length (mm) (H) | Cable cross-section (mm2) | Code | Uo (kV) |
Un (kV) |
Um (kV) |
400 | 6 – 1200 | HHK – 1E03 – XY | 1.9 | 3 | 3.3 |
400 | 6 – 1200 | HHK – 1E07 – XY | 3.3 | 6 | 7.2 |
500 | 10 – 1200 | HHK – 1E12 – XY | 6 | 10 | 12 |
580 | 10 – 1200 | HHK – 1E17 – XY | 7.2 | 11 | 17.5 |
580 | 10 – 1200 | HHK – 1E24 – XY | 12 | 20 | 24 |
700 | 10 – 1200 | HHK – 1E36 – XY | 19 | 33 | 36 |