Project Description
These joints are used to connect three-core three-lead PILC cables to single-core XLPE cables.
These joints are mostly used in city substations, repairing or constructing new posts.
- Insulating tubing
- Stress control tubing
- Anti-oil tubing
- Yellow tape
- Semi-conductor tape
- Insulating tape
- Copper mesh
- Two-layer tubing (red / black)
- Medium voltage ferrule
- Installation manual
- Taped jacketing tubing
- Earth kit (if the earth is tape shield)
- Installation kit
- Red cable breakout
- Room temperature ranging from -40 to +105 °C
- Cross-linked polymer insulation
- Flame retardant
- Easy installation
- In accordance with DIN VDE 0278, CENELEC HD 629.1S1, IEC60502-4 Standard
- With UV protection layer
- With unlimited lifetime / energized as soon as it is installed on the cable
To order a cable with specific cross section and conductor type, you can act as follows at the time of selecting the code.
For instance:
A 120 mm2 three-core three-lead PILC copper cable joint to three 185 mm2 single-core XLPE aluminum cables with a voltage of 24kv PHJMH – 3124 – 120185 BI
Z = PILC cable cross section (mm2) Y= (CU/ AL /BI) Type of ferrule X = XLPE cables cross section (mm2) |
Cable cross-section (mm2) | Code | Uo (kV) |
Un (kV) |
Um (kV) |
6 – 300 | HJMH – 3103 – ZXY | 1.9 | 3 | 3.3 |
6 – 300 | HJMH – 3107 – ZXY | 3.3 | 6 | 7.2 |
10 – 300 | HJMH – 3112 – ZXY | 6 | 10 | 12 |
10 – 300 | HJMH – 3117 – ZXY | 8 | 15 | 17.5 |
10 – 300 | HJMH – 3124 – ZXY | 12 | 20 | 24 |
10 – 300 | HJMH – 3136 – ZXY | 19 | 33 | 36 |