Heat shrinkable repair sleeves are used to repair the sheath of various types of cables with all voltages or the internal insulation in low-voltage cables without any need for cutting the cable and the semi-conductor.
The inner surface of this sleeve is coated with sealing adhesive, which melts upon heating, leading to a full and suitable sealing. The zip of this sleeve is made of stainless steel which does not rust away in exposure to soil moisture and over time.
- Thick insulation wall
- Produced from cross-linked polyethylene
- Fast shrinking feature
- High insulation resistant coefficient
- UV resistant
- Shrinking temperature is 110 °C
|Maximum length (mm)||Sleeve thickness after full shrinkage (mm)||Maximum sleeve diameter after heating (mm)||Minimum sleeve diameter before heating (mm)||Size||No.|
|1000||2.4||10||36||HWS 36 /10||1|
|1000||2.5||13||55||HWS 55 /13||2|
|1000||3||20||85||HWS 85 /20||3|
|1200||3||27||108||HWS 108 /27||4|
|1500||3.2||30||136||HWS 136 /30||5|
|1500||3.2||50||180||HWS 180 /50||6|