Project Description
These joints are suitable for low voltage cables with low smoke o zero halogen. They are resistant to flame and fire and do not emit smoke. They can be installed without any need for special tools or heat.
UK: BS476 PART 7 & Class 1Y rating
Germany: DIN 4102/part 1 & B1 rating
France: NFP 92 501, 5&16 and M2 rating
- Yellow shell which inhibits production of toxic gas
- Resistant to UV radiation
- Halogen free
- Small dimensions and easy installation
- 100% Sealing
- Used in wells and underwater (river, pool)
- Used in mines, tunnels or places where lack of any toxic gas or smoke is important.
- Indoor space
- Outdoor space
- Underground
- Inside cable tray or duct
- In the tunnel
- Resin case
- Two-part resin
- Ferrule
- Installation manual
- Armor earth kit (if needed)
Withstand Voltage: U0/UN (UM) 0.6/1 (1.2) kV |
Cable cross-section (mm2) | Code | Uo (kV) |
Un (kV) |
Um (kV) |
2.5 – 1200 | CM – LSHF –SY | 0.6 | 1 | 1.2 |
For instance: 3×25+16 low voltage cable resin joint with copper conductor CM- LSHF – SY – 3X25+16 CU S = number of cores and cable cross-section (mm2) Y= (A1/Cu/BI) Type of ferrule |