Project Description

These joints are suitable for installation on different types of covered-conductor cables and connect two non-armored cables of the same size to one another. Their jacketing tubing contains special materials resistant to UV radiation as well as heat and cold.

These joints are mostly used in city substations and can be installed either horizontally or vertically.

  • Insulating tubing
  • Stress control tubing
  • Yellow tape
  • Semi-conductor tape
  • Insulating tape
  • Copper mesh
  • Two-layer tubing (red / black)
  • Special medium voltage ferrule
  • Earth ferrule
  • Installation manual
  • Taped jacketing tubing resistant to UV radiation
  • Earth kit (if the earth is tape shield)
  • Room temperature ranging from -40 to +105 °C
  • Cross-linked polymer insulation
  • Flame retardant
  • Easy installation
  • In accordance with DIN VDE 0278, CENELEC HD 629.1S1, IEC60502-4 Standard
  • With ANTI-UV and ANTI-TRACK protection layer
  • With unlimited lifetime / energized as soon as it is installed on the cable
  • With integrated jacketing tape for the sealing of the whole joint

To order a cable with specific cross section and conductor type, you can act as follows at the time of selecting the code.

For instance:

A single-core joint with a voltage of 24kv with a 70 mm2 cross section and an aluminum ferrule PHJMB – 1124 – 70 AL

Y= (CU/ AL /BI) Type of ferrule
X = XLPE cables cross section (mm2)
Cable cross-section (mm2) Code Uo
(kV)		 Un
(kV)		 Um
(kV)
6 – 240 HJMB – 1103 – XY 1.9 3 3.3
6 –  240 HJMB – 1107 – XY 3.3 6 7.2
10 – 240 HJMB – 1112 – XY 6 10 12
10 – 240 HJMB – 1117 – XY 8 15 17.5
10 – 240 HJMB – 1124 – XY 12 20 24
10 – 240 HJMB – 1136 – XY 19 33 36