Project Description
This tape has a high insulation power and is used for installation on the bus bar in switchgears or the exposed outdoor spaces. This tape reduces Phase-Phase and Phase-Earth clearances, and in addition to providing protection against bridging, the tape occupies less space.
For points where it is impossible to place bas bar tubing, this tape is used like the bended part of the bus bar or the mid part of long bus bars. The inner part of this tape has an adhesive layer, which melt and leads to full sealing upon heating.
Specifications
- Thick insulation wall
- Produced from cross-linked polyethylene
- Fast shrinking feature
- High insulation resistant coefficient
- UV resistant
- Shrinking temperature is 100 °C
- Flexible and easy installation
- With sealing adhesive layer
- Easily remove the tape upon inspection and maintenance
Technical specifications
Dimensions
| Maximum length | Tubing thickness after full shrinkage (mm) | Tubing width (mm) | Code | No. |
| 5 or 10 meters in spool form | 1 | 25 | BIT – 1 – X | 1 |
| 1 | 50 | BIT – 2 – X | 2 | |
| 1 | 100 | BIT – 3 – X | 3 |
| X = Spool length (m) |