Project Description
These joints are suitable to be installed on various types of three-stranded cables and connect two non-armored cables with the same size.
These joints are mostly used in electrical substations, cities or factories and can be buried or placed on a cable tray.
- Insulating tubing
- Stress control tubing
- Yellow tape
- Semi-conductor tape
- Insulating tape
- Copper mesh
- Two-layer tubing (red / black)
- Medium voltage ferrule
- Earth ferrule
- Installation manual
- Taped jacketing tubing
- Earth kit (if the earth is tape shield)
- Room temperature ranging from -40 to +105 °C
- Cross-linked polymer insulation
- Flame retardant
- Easy installation
- In accordance with DIN VDE 0278, CENELEC HD 629.1S1, IEC60502-4 Standard
- With UV protection layer
- With unlimited lifetime / energized as soon as it is installed on the cable
- With integrated jacketing tape for the sealing of the whole joint
To order for a cable with specific cross section and conductor type, you can act as follows at the time selecting the code.
For instance:
Three core joint with a voltage of 24kv and 185 mm2 cross section and PHJMV – 3324 – 185 CU copper ferrule
| X = cable cross-section (mm2) Y= (CU/ AL /BI) Type of ferrule |
| Cable cross-section (mm2) | Code | Uo (kV) |
Un (kV) |
Um (kV) |
| 6 – 300 | HJMV – 3303 – XY | 1.9 | 3 | 3.3 |
| 6 – 300 | HJMV – 3307 – XY | 3.3 | 6 | 7.2 |
| 10 – 300 | HJMV – 3312 – XY | 6 | 10 | 12 |
| 10 – 300 | HJMV – 3317 – XY | 8 | 15 | 17.5 |
| 10 – 300 | HJMV – 3324 – XY | 12 | 20 | 24 |
| 10 – 300 | HJMV – 3336 – XY | 19 | 33 | 36 |