Phone: 02188847650 | Fax: 88307565 | Emergency Call, Suggestion & Complaints: 09128103484|info@parsmafsal.com

General Heat Shrinkable Indoor Three Core Cable Termination HSK–3I

General Heat Shrinkable Indoor Three Core Cable Termination HSK–3I 2018-05-23T21:28:40+00:00

Project Description

These cable terminations are suitable to be installed on three-stranded cables and are used in indoor spaces where they have no direct contact with wind, rain or snow.

  • Room temperature ranging from -40 to +105 °C
  • Cross-linked insulation
  • Flame retardant
  • Easy installation
  • In accordance with CENELEC HD 629.1S1, DIN VDE 0278, IEC60502-4 Standard
  • With UV protection layer
  • With unlimited lifetime / energized as soon as it is installed on the cable

To order a cable with specific cross section and conductor type, you can act as follows at the time selecting the code.

For instance:

Indoor three core cable termination for a voltage of 24kv with 185 mm2 cross section and PHSK – 3I24 – 185Cu copper cable lug

  • Insulating tubing
  • Stress control tubing
  • Yellow tape
  • Red tape
  • Medium voltage cable lug
  • Earth cable lug
  • Cable breakout
  • Installation manual
  • Rain shed (needed for voltage of 24 kV or above)
  • Armor kit (if the cable is armored)
  • Earth kit (if the earth is tape shield)
  • Angle boot (if needed based on the specifications of the electrical panel)

PHSK – 3I cable terminations are generally used in electrical substations, cities, factories and electrical panels which have suitable spaces or in electrical transformer rooms or indoor substations.

X = cable cross-section (mm2)
Y= (A1/Cu/BI) Type of cable lug
Length (mm) (H) Cable cross-section (mm2) Code Uo
(kV)
Un
(kV)
Um
(kV)
400 6 – 400 HSK – 3I03 – XY 1.9 3 3.3
400 6 – 400 HSK – 3I07 – XY 3.3 6 7.2
450 10 – 400 HSK – 3I12 – XY 6 10 12
500 10 – 400 HSK – 3I17 – XY 7.2 11 17.5
600 10 – 400 HSK – 3I24 – XY 12 20 24
750 10 – 400 HSK – 3I36 – XY 19 33 36