Project Description
These joints are suitable to be installed on various types of single-stranded armored cables and connect two armored cables with the same size. This joint has metal case and has mechanical and electrical protections just like cable armor.
These joints are mostly used in electrical substations, cities or factories which do need protection against mechanical pressures applied from the environment or protection against rodents.
- Insulating tubing
- Stress control tubing
- Yellow tape
- Semi-conductor tape
- Insulating tape
- Copper mesh
- Two-layer tubing (red / black)
- Medium voltage ferrule
- Earth ferrule
- Installation manual
- Taped jacketing tubing
- Earth kit (if the earth is tape shield)
- Armor case
- Room temperature ranging from -40 to +105 °C
- Cross-linked polymer insulation
- Flame retardant
- Easy installation
- In accordance with DIN VDE 0278, CENELEC HD 629.1S1, IEC60502-4 Standard
- With UV protection layer
- With unlimited lifetime / energized as soon as it is installed on the cable
- With integrated jacketing tape for the sealing of the whole joint
To order for a cable with specific cross section and conductor type, you can act as follows at the time selecting the code.
For instance:
Single core joint with a voltage of 24kv and 185 mm2 cross section and PHJCV – 1124 – 185 AL aluminum ferrule
| X = cable cross-section (mm2) Y= (CU/ AL /BI) Type of ferrule |
| Cable cross-section (mm2) | Code | Uo (kV) |
Un (kV) |
Um (kV) |
| 6 – 300 | HJUV – 3303 – XY | 1.9 | 3 | 3.3 |
| 6 – 300 | HJUV – 3307 – XY | 3.3 | 6 | 7.2 |
| 10 – 300 | HJUV – 3312 – XY | 6 | 10 | 12 |
| 10 – 300 | HJUV – 3317 – XY | 8 | 15 | 17.5 |
| 10 – 300 | HJUV – 3324 – XY | 12 | 20 | 24 |
| 10 – 300 | HJUV – 3336 – XY | 19 | 33 | 36 |