Project Description

These cable terminations are suitable to be installed on single-stranded cables and are used in outdoor spaces where they have direct contact with wind, rain or snow and there is heavy pollution in the environment.

  • Room temperature ranging from -40 to +105 °C
  • Cross-linked insulation
  • Flame retardant
  • Easy installation
  • In accordance with CENELEC HD 629.1S1, DIN VDE 0278, IEC60502-4 Standard
  • With UV protection layer
  • With unlimited lifetime / energized as soon as it is installed on the cable
  • Suitable for very polluted environments

To order a cable with specific cross section and conductor type, you can act as follows at the time selecting the code.

For instance:

Outdoor single core cable termination for a voltage of 24kv with 185 mm2 cross section and PHHK – 1E24 – 185AI aluminum cable lug

  • Insulating tubing
  • Stress control tubing (shrinkable or push-on)
  • Yellow tape
  • Red tape
  • Medium voltage cable lug
  • Installation manual
  • Earth cable lug
  • Rain shed
  • Armor kit (if the cable is armored)
  • Earth kit (if the earth is tape shield)

PHHK – 1E cable terminations have all the properties of PHSK – 1E cable terminations. The difference is that they are designed and manufactured for installation in higher altitudes with severe raining and snowing or in heavily polluted environments.

X = cable cross-section (mm2)
Y= (A1/Cu/BI) Type of cable lug
Length (mm) (H) Cable cross-section (mm2) Code Uo
(kV)		 Un
(kV)		 Um
(kV)
400 6 – 1200 HHK – 1E03 – XY 1.9 3 3.3
400 6 – 1200 HHK – 1E07 – XY 3.3 6 7.2
500 10 – 1200 HHK – 1E12 – XY 6 10 12
580 10 – 1200 HHK – 1E17 – XY 7.2 11 17.5
580 10 – 1200 HHK – 1E24 – XY 12 20 24
700 10 – 1200 HHK – 1E36 – XY 19 33 36