Phone: 02188847650 | Fax: 88307565 | Emergency Call, Suggestion & Complaints: 09128103484|info@parsmafsal.com

Plug In Termination Type C Rear (630A-1250A) RPC

Plug In Termination Type C Rear (630A-1250A) RPC 2018-05-23T21:51:08+00:00

Project Description

The termination type C rear is just like the main cable termination type C, with the difference that for branching or ringing the network, this termination is connected to the rear part of the main cable termination where the branching or ringing operation takes place.

Features:

  • Its size can change from 25 to 630 only by replacing the adaptor and cable lug, and only one 630A type of body is needed for using all sizes in mind.
  • The stress control is made of silicon, whose capability to control the electric field is quite higher than EPDM, and despite the EPDM type, it prevents the explosion of the termination resulted from sudden changes in the electric field. It does not lead to fire and will not form toxic smoke.
  • The insulation and stress control of 100% of the terminations are tested and commissioned at the time of production.
  • Suitable for aluminum and copper cable.
  • Very easy and fast installation without any need for specific devices for installation.
  • Inflammable and flame-retardant.
  • Resistant to tension and high temperature
  • With the capability to connect to one another, this termination can be used as a joint or ring.
  1. The silicon layer used for the stress control (adaptor) is separated from the main body of the termination.
  2. It has special cable lug suitable for type C bushing
  3. It has one external semi-conductor for transfer of electrons remained in the shield
  4. It has strong insulation due to use of silicon
  5. Isolated part and suitable for voltage test
  6. Capable to open and close the termination frequently from the bushing
  7. Can be connected to bushing at different angles
X = cable cross-section (mm2)
Y= (A1/Cu/BI) Type of cable lug

Main Plug In Termination Type C for Single Core FPC Cable (7.2kV to 36kV)

Um (kV) Code Cable Cross Section (mm2)
7.2 – 24 FPC – 124 –XY 50 – 630
36 FPC – 136 –XY 50 – 630

Branch Plug In Termination Type C for Single Core RPC Cable (7.2kV to 36kV

Um (kV) Code Cable Cross Section (mm2)
7.2 – 24 RPC – 124 –XY 50 – 630
36 RPC – 136 –XY 50    – 630

Main Plug In Termination Type C for Three Core FPC Cable (7.2kV to 36kV)

Um (kV) Code Cable Cross Section (mm2)
7.2 – 24 FPC – 324 –XY 50 – 400
36 FPC – 336 –XY 50 – 400

Branch Plug In Termination Type C for Three Core RPC Cable (7.2kV to 36kV)

Um (kV) Code Cable Cross Section (mm2)
7.2 – 24 RPC – 324 –XY 50 – 400
36 RPC – 336 –XY 50 – 400

For instance: 24kV Main Cable Termination for Single Core Aluminum Cable with size 185 FPC – 124 – 185 BI