Project Description

These joints are used to connect three-core single-lead PILC cables to three-core XLPE cables. These joints are capable of connecting cables with different cross sections.

These joints are mostly used in city substations, repairing or constructing new posts.

  • Insulating tubing
  • Stress control tubing
  • Anti-oil tubing
  • Yellow tape
  • Semi-conductor tape
  • Insulating tape
  • Copper mesh
  • Two-layer tubing (red / black)
  • Medium voltage ferrule
  • Installation manual
  • Taped jacketing tubing
  • Earth kit (if the earth is tape shield)
  • Black cable breakout
  • Room temperature ranging from -40 to +105 °C
  • Cross-linked polymer insulation
  • Flame retardant
  • Easy installation
  • In accordance with DIN VDE 0278, CENELEC HD 629.1S1, IEC60502-4 Standard
  • With UV protection layer
  • With unlimited lifetime / energized as soon as it is installed on the cable

To order a cable with specific cross section and conductor type, you can act as follows at the time of selecting the code.

For instance:

A 185 mm2 three-core single-lead PILC aluminum cable joint to a 185 mm2 three-core XLPE aluminum cable with a voltage of 24kv PHJMS – 3324 – 185185 AL

Z = PILC cable cross section (mm2)
Y= (CU/ AL /BI) Type of ferrule
X = XLPE cables cross section (mm2)
Cable cross-section (mm2) Code Uo
(kV)		 Un
(kV)		 Um
(kV)
6 – 300 HJMS – 3303 – ZXY 1.9 3 3.3
6 –  300 HJMS – 3307 – ZXY 3.3 6 7.2
10 – 300 HJMS – 3312 – ZXY 6 10 12
10 – 300 HJMS – 3317 – ZXY 8 15 17.5
10 – 300 HJMS – 3324 – ZXY 12 20 24
10 – 300 HJMS – 3336 – ZXY 19 33 36