Phone: 02188847650 | Fax: 88307565 | Emergency Call, Suggestion & Complaints: 09128103484|info@parsmafsal.com

Heat Shrinkable Single Core Repair Cable Joint HJMR-11

Heat Shrinkable Single Core Repair Cable Joint HJMR-11 2018-05-23T21:42:50+00:00

Project Description

These joints are suitable to be installed on various types of single-stranded cables and connect two cables with or without the same size.

This joint is suitable for installation and repair on various types of single-stranded cables and they connect two cables which does or does not have the same size. These joints are used to repair and maintain cables or joints that are damaged and face limitations such as small space, limited time and need for special bill of materials for repair and where it is not possible to strip the cable in a normal way. Given the small space, cable stripping faces some restrictions, so this joint is designed and offered for this purpose.

  • Insulating tubing
  • Black tubing
  • Yellow tape
  • Semi-conductor tape
  • Insulating tape
  • Copper mesh
  • Two-layer tubing (red / black)
  • Medium voltage ferrule
  • Long ferrule (if needed)
  • Earth ferrule
  • Installation manual
  • Taped jacketing tubing
  • Earth kit (if the earth is tape shield)
  • Room temperature ranging from -40 to +105 °C
  • Cross-linked polymer insulation
  • Flame retardant
  • Easy installation
  • In accordance with DIN VDE 0278, CENELEC HD 629.1S1, IEC60502-4 Standard
  • With UV protection layer
  • With unlimited lifetime / energized as soon as it is installed on the cable
  • With integrated jacketing tape for the sealing of the whole joint
  • Faster repair and decrease in the time of self-extinguishing
  • No need for connection of two joints in the damaged cable

To order for a cable with specific cross section and conductor type, you can act as follows at the time selecting the code.

For instance:

Single core joint with a voltage of 24kv and 185 mm2 cross section and PHJMR – 1124 – 185 AL aluminum ferrule

X = cable cross-section (mm2)
Y= (CU/ AL /BI) Type of ferrule

Cable cross-section (mm2) Code Uo
(kV)
Un
(kV)
Um
(kV)
6 – 1200 HJMR – 1103 – XY 1.9 3 3.3
6 –  1200 HJMR – 1107 – XY 3.3 6 7.2
10 – 1200 HJMR – 1112 – XY 6 10 12
10 – 1200 HJMR – 1117 – XY 8 15 17.5
10 – 1200 HJMR – 1124 – XY 12 20 24
10 – 1200 HJMR – 1136 – XY 19 33 36