Project Description

These cable terminations are suitable to be installed on three-stranded cables and are used in outdoor spaces where they have direct contact with wind, rain or snow and there is mild pollution in the environment.

  • Room temperature ranging from -40 to +105 °C
  • Cross-linked insulation
  • Flame retardant
  • Easy installation
  • In accordance with CENELEC HD 629.1S1, DIN VDE 0278, IEC60502-4 Standard
  • With UV protection layer
  • With unlimited lifetime / energized as soon as it is installed on the cable

To order a cable with specific cross section and conductor type, you can act as follows at the time selecting the code.

For instance:

Outdoor three core cable termination for a voltage of 24kv with 185 mm2 cross section and PHSK – 3E24 – 185Cu copper cable lug

  • Insulating tubing
  • Stress control tubing
  • Yellow tape
  • Red tape
  • Medium voltage cable lug
  • Earth cable lug
  • Installation manual
  • Cable breakout
  • Rain shed
  • Armor kit (if the cable is armored)
  • Earth kit (if the earth is tape shield)

PHSK – 3E cable terminations are used in electrical substations, cities or factories and also in some platforms or transmission towers which have suitable spaces for installation.

X = cable cross-section (mm2)
Y= (A1/Cu/BI) Type of cable lug
Length (mm) (H) Cable cross-section (mm2) Code Uo
(kV)		 Un
(kV)		 Um
(kV)
700 6 – 400 HSK – 3E03 – XY 1.9 3 3.3
700 6 – 400 HSK – 3E07 – XY 3.3 6 7.2
800 10 – 400 HSK – 3E12 – XY 6 10 12
800 10 – 400 HSK – 3E17 – XY 7.2 11 17.5
950 10 – 400 HSK – 3E24 – XY 12 20 24
950 10 – 400 HSK – 3E36 – XY 19 33 36